Bed Cleaner

The Bed Cleaner is a multi-purpose machine that has been designed to speed up all the labour intensive activities in the manual preparation of the casting beds ready for hollowcore production.

It is powered by a water cooled, four cylinder, low emission diesel engine and is hydraulically controlled by the operator who sits within the safety of the protective cabin.

The Bed Cleaner sprays mould oil/release agent whilst travelling in the reverse direction. A light even coat is applied by the six spray nozzles to the entire width of the bed one pass at 40 metres per minute. It is also designed for simultaneous multi-strand pulling. The hydraulic strand carrier can pull up to 10 x 12.5 mm prestressing strands at a time at a speed of 40 metres per minute.

Features

Rotating main bed brush
Two additional chamfer rail brushes
Six mould oil spray nozzles
Pulls up to 10 x 12.5 mm strands
Lays slab insulation covers
Picks up slab insulation covers
Low emission 4 cylinder diesel engine

Go Back

Bed Cleaners

Bed Cleaner

The Bed Cleaner is a multi-purpose machine that has been designed to speed up all the labour intensive activities in the manual preparation of the casting beds ready for hollowcore production.

CONTACT US